|
|
|
Based on the 5th generation RAID controller architecture, JetStor SATA Model 516F 16 bay RAID array combines high density SATA drives with lightning-fast 4Gbit/sec fiber host channels for a rapid, uninterrupted access to your most demanding applications requiring high bandwidth. It easily handles uncompressed 1080i high-definition video stream. Engineered to meet stringent demands for continuous availability, JetStor SATA 516F RAID array features powerful PowerPC RISC processor for blazingly fast I/O operations, parity-assist ASIC, completely cableless backplane-based design, and storage capacities of almost 16TB in one small 3U enclosure.
Low service and integration costs are assured by the JetStor's cableless design, two redundant hot-swappable power supplies with two independent power inputs, turbo cooling fans, and embedded RAID controller. Three year warranty comes standard with every array and covers all components.
The JetStor SATA 516F RAID addresses many challenges present in video production studios and delivers ample bandwidth, unparalleled storage flexibility, higher levels of data availability, management and configuration simplicity, all while securing maximum investment protection to support future growth.
|
|
|
|
|
|
Serial ATA drive capacities of 73GB (10,000 rpm), 150GB (10,000 rpm), 200GB (7,200 rpm), 250GB (7,200 rpm), 300GB (7,200 rpm), 400GB (7,200 rpm), 500GB (7,200 rpm), 750GB (7,200 rpm), and 1TB (7,200rpm) are available.
Full 48-bit ATA addressing standard support.
Maximum capacity 16TB when using 1TB drives.
|
|
|
|
|
|
RAID Architecture
|
|
64-bit RISC PowerPC 440SP Storage Processor
Up to 2150 Mb/sec internal bandwidth
266 MHz PCI-X 2.0 interface to the backplane
|
|
Host Bus Interface
|
|
Two, 4Gbit/sec Fiber Channel Optical SFP, LC cables
|
|
Disk Bus Interface
|
|
Sixteen 3 Gb PHY Serial ATA Interface channels (SATA II); 48-bit addressing
S.M.A.R.T. and NCQ supported
|
|
Command Queuing
|
|
253 commands (host FC channels)
|
|
Cache
|
|
Up to 2GB (using one, industry-standard DDR2 ECC SDRAM)
|
|
Operating Systems Supported
|
|
Mac OS X, Windows Server 2003, VMWare ESX Server, Windows 2000 and MSCS (Microsoft Cluster Server), Windows NT, Sun/Solaris, Linux, FreeBSD, and others to be announced
|
|
Temperature
|
|
50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating
|
|
Relative Humidity
|
|
10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)
|
|
Certifications
|
|
FCC, CE, TUV, and UL/CSA
|
|
Size/Weight
|
|
19" wide, 22" deep, 5.25" (3U) high; 40 lb. / 18 kg. (without disk drives)
|
|
I/O Connectors
|
|
Two 4Gbit SFP Fiber Channel
Two 9-pin DB9 type RS-232 serial terminal port, UPS port
RJ45 Management Port / Ethernet
|
|
Power Required
|
|
110 or 220 VAC, ±20% @ 6 amps / 3 amps peak; 47 to 63 Hz. autosensing
Dual 460W power supplies with two independent power inputs
|
|
|
|
|
|
|
|
|
|
|
|
Video Color Correction
2K Film
DVR / Video Surveillance
Uncompressed SD and HD video
Audio & Video Streaming
Digital Cinema
Near line digital content
Diagnostic Imaging / Radiology
Pre-press Production
High Performance File Server
|
|
|
|
|
|
600MB/sec bandwidth to support the most demanding non-linear editing and SAN environments.
Exclusive Advanced Data Sentry technology (RAID 6) provides the highest level of data protection. Multiple simultaneous drive failures can be tolerated without downtime or data loss.
Array Roaming feature gives administrators the ability to move a complete raid set to another system without losing RAID configuration and data on that raid set.
Redundant Flash Image provides an extra layer of protection against the firmware image corruption. If the primary firmware of the RAID controller becomes corrupted, the secondary firmware image will automatically be used.
Full 48-bit ATA addressing standard support allows for up to 144 petabytes capacity per drive to be utilized in the RAID array.
ASIC assisted parity for lightning-fast throughput.
RAID controller provides RAID 0, 0+1, 1, 3, 5, and RAID 6, Global Hot Spare Disk, Auto Rebuild, and up to 2GB of DDR2 ECC SDRAM-based data cache.
Intelligent SATA backplane design (uses no cables) allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance.
Built-in management Ethernet port provides easy access to the web-based GUI RAID Manager for configuration, management, and monitoring functions. E-mail event notification is built-in.
Completely user configurable via the front panel.
Online Parity Consistency verification feature insures RAID set integrity.
|
|
|
|
|
|
AC&NC - Related Products
 JetStor SATA 516F
JetStor SATA 416iS
JetStor SATA 416S
JetStor SATA 412S
JetStor SATA 405U
JetStor SATA 405S
JetStor SATA 642F
JetStor SATA 412iS
|
|
|
|
|
